AKD Central Power Supply Firmware Motion Control with EtherCAT. Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

AKD Near Servo Drive Firmware containing hybrid motor cable, individual STO, and tertiary field bus.

AKD PDMM Servo Drive (800 MHz) Firmware Motion Control EtherCAT. Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

AKD PDMM Servo Drive (1.2 GHz) Firmware Motion Control EtherCAT. Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

Used to backup the network topology, the AKD drives firmware and the AKD drives data.

MKD-C and MKD-N EtherCAT Communications Manual describes the installation, setup, range of functions, and software protocol for the EtherCAT MKD product series.

This manual describes the installation, setup, range of functions, and software protocol for the decentral drive system with AKD-C and AKD-N devices. Valid for firmware version 1.20.

This manual describes the installation, setup, range of functions, and software protocol for the decentral drive system with AKD-C and AKD-N devices. Valid for firmware version 1.20.

AKD SynqNet Communications Manual describes the installation, setup, range of functions, and software protocol for the SynqNet AKD product series. Valid for firmware version 1.20.

This manual provides an easy start guide for using AKD with RSLogix5000, an overview on how to import and configure the AKD Add-On instructions using RSLogix5000 version 16 or later, as well as a reference to the Add-On instructions. Valid for firmware version 1.20.

AKD EtherCAT - Beschreibt die Installation, Inbetriebnahme, den Funktionsumfang und das Softwareprotokoll für AKD mit EtherCAT. Gültig für Firmware-Version 1.20.

AKD EtherCAT Communications Manual describes the installation, setup, range of functions, and software protocol for the EtherCAT AKD product series. Valid for firmware version 1.20.

AKD CANopen - Beschreibt die Installation, Inbetriebnahme, den Funktionsumfang und das Softwareprotokoll für AKD mit CANopen. Gültig für Firmware-Version 1.20.

Describes AKD and AKD BASIC faults, warnings, error messages, and alarms. Provides cause and remedy instructions to help determine specifics of the failure and to correct the underlying problem.

AKD CAN-Bus Communications Manual describes the installation, setup, range of functions, and software protocol for the CANopen AKD product series. Valid for firmware version 1.20.

PosI/O & PosI/O-Monitor Erweiterungskarte Technische Beschreibung; PosI/O & PosI/O-Monitor Expansion Card technical description.

Legacy - Position Sensor Data Sheet for IDC/Kollmorgen electric cylinders

Application note for AKD2G low voltage DC operation.

This document has been replaced by the "Goldline EB Servo Motor Instruction Manual".

This document has been replaced by the "Goldline EB Servo Motor Instruction Manual".