WorkBench is a Graphical User Interface that allows configuration from different Kollmorgen devices. Includes standard installer: the application with complete help files. The .NET Framework is downloaded from the internet if not already installed. Supports AKD, AKD2G, and MKD devices. For more information regarding features, see the AKD WorkBench Release Notes. English-only GUI.

WorkBench is a Graphical User Interface that allows configuration from different Kollmorgen devices. Includes full installer: the application with complete help files and the .NET Framework required by the application. Supports AKD, AKD2G, and MKD devices. For more information regarding features, see the AKD Workbench Release Notes. English-only GUI.

This is a declaration that the high voltage AKD Servo Drives (types AKD-x04807, x=B, P, T, M) are in conformity with Schedule 2, Part 1 (Annex I) of SI 2008 No. 1597.

Used to backup the network topology, the AKD2G drives firmware, and the AKD2G drive's data.

KAS Runtime Firmware for 800 MHz AKD PDMM.
Note: PDMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

KAS Runtime Firmware for 1.2 GHz AKD PDMM.
Note: PDMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

KAS Runtime Firmware for 800 MHz AKD PDMM with an integrated AKD-N device.
Note: PDMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

This firmware supports AKD PDMM Servo Drive (1.2 GHz) with an integrated AKD-N device.
Note: This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009 and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

KAS Runtime Firmware for 800 MHz single-core PCMM.
Note: PCMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

KAS Runtime Firmware for dual-core 1.2 GHz PCMM.
Note: PCMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

KAS Runtime Firmware for single-core PCMM.
Note: PCMM Runtime version and KAS IDE version must be identical (e.g., both must have version 4.00.x.zzzz).

These release notes for the AKD2G drive firmware (software that executes inside the AKD2G drive) describes the changes between the previous firmware releases and the current release. Includes known issues, new features, feature changes, and fixed bugs.

This document provides installation instructions and technical data for the P80360-ECE (EtherCAT-based) stepper drive. This is the initial release.

This document provides installation and setup information for the P80360-R4E Stepper Drive.

This Quick Start document provides basic information on installing the drive and configuring Kollmorgen Space.

Used to backup the network topology, the AKD1G drive's firmware, and the AKD1G drive's data.

This is an all-inclusive Servo Drive Firmware package for AKD-B, -P, and -T devices. The package also includes EDS and fieldbus files as well as Release Notes. Note: This firmware complies with U.S. and E.U. export regulations (E.U. Dual Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).

Technical Notice for PMDC Explosion Proof (EP & MEP) Hazardous Location Motors. 

Certificate of Compliance for the P80360-R4E with ISO 13849-1 ISO 13849-2. Safe Torque Off (STO) function, complies with the requirements for PL e, Category 4. 

EU Declarationof Conformity for Goldine ATEX devices. The device conforms to EN 60079-0:2018, EN 60079-1:2014, and EN 61800-3: 2004/A1:2012.