Readme - MMC-D32/D64 ETX Card Support for PiCPro V16.X and V17.X

If you are using PiCPro V16.0, V16.1 or V17.0 (any service pack level) with an MMC-D32 (P/N M.3000.0816 & M.3000.1064) or an MMC-D64 (P/N M.3000.0817), these controls must use the firmware provided below.

Note: MMC-D32 and MMC-D64 controls with other Part Numbers are not affected by this requirement.

---------------------------------------------------------------------------------------------------------

Filename: MMC-DSA32-64 Standalone Control R0606.zip


PRODUCT: Firmware support for MMC-D32 (P/N M.3000.0816 & M.3000.1064) or an MMC-D64 (P/N M.3000.0817).

FIX: Download and unzip .hex file. Copy hex file over to: 

V16.X: C:\Program Files\G&L Motion Control\PiCPro V16.0 Professional Edition\Firmware\Digital MMC Smart Drive

V17.X: C:\G&L Motion Control Data\PiCPro V17.0 Professional Edition\Firmware\Digital MMC Smart Drive

Note: The drive letter above (C:) may be different on your installation.

Released 03/26/2010, 187 KB